ENC14/16 Armario 406 x 356 x 140 mm
Robusto, versátil
Montaje fácil y seguro de equipos Campbell
meteorología aplicaciones agua aplicaciones energía aplicaciones flujo gas y turbulencia aplicaciones infraestructuras aplicaciones suelo aplicaciones

Resumen

El armario ENC14/16 es de tamaño medio-grande donde en su interior podemos albergar un datalogger, fuente de alimentación y uno o más periféricos. Es habitual utilizarlo en nuestros trípodes de acero inoxidable CM110, CM115, o CM120 y fijarlo en una de sus patas.

Leer más

Ventajas y características

  • Para uso en intemperie, y para proteger los instrumentos
  • Placa de montaje diseñada de forma que sea fácil fijar componentes Campbell Scientific
  • Armario color blanco, estabilizado UV que refleja la radiación solar—reduciendo los gradientes de temperatura dentro del armario sin necesidad de un protector para la radiación

Imágenes

Ficheros CAD:

Descripción detallada

The ENC14/16's backplate is prepunched with one-inch-on-center holes suitable for attaching a datalogger, power supply, and a communications or measurement and control peripheral.

Especificaciones

Color White (Reflects solar radiation, reducing temperature gradients inside the enclosure without requiring a separate radiation shield.)
Construction Fiberglass-reinforced polyester enclosure with door gasket, external grounding lug, stainless-steel hinge, and lockable hasps
Enclosure Classification NEMA 4X (before being modified for cable entry)
Number of Cable-Entry Seals 2 large, 2 medium, 2 small
Dimensions
  • 40.6 x 35.6 x 14 cm (16 x 14 x 5.5 in.) internal
  • 38.63 x 33.66 x 17.6 cm (15.21 x 13.25 x 6.93 in.) internal under the lid space
  • 44.27 x 39.19 x 19.58 cm (17.43 x 15.43 x 7.71 in.) external
Weight 6 kg (13 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Dataloggers

Producto Compatible Nota
CR1000 (retired)
CR200X (retired)
CR216X (retired)
CR300
CR3000 (retired)
CR350
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000X (retired)

Miscelaneo

Producto Compatible Nota
21X (retired)
CR10 (retired)
CR10X (retired)
CR23X (retired)
CR500 (retired)
CR510 (retired)
CR9000 (retired)

Preguntas frecuentes

Número de FAQs relacionadas con ENC14/16: 16

Expandir todoDesplegar todo

  1. What can be done if an enclosure gasket becomes torn or damaged?

    If you purchased a Stahlin enclosure from Campbell Scientific and it has a failed gasket, we can help you. We will need you to provide an image of the failed gasket, verify the size of your enclosure, and provide your contact information. We can then arrange to have a replacement gasket sent to you from Stahlin. For assistance, contact Technical Support at 435.227.9100.

  2. What are the weight and internal dimensions of the ENC14/16?
    The ENC14/16 weighs 13 lb. Its internal dimensions are 14 x 16 x 5.5 in.
  3. What are the distances, center-to-center, of the mounting holes in the back of the ENC14/16?
    12 inches.
  4. If the copper ground terminals attached to the bottom of an enclosure are oxidized and corroded, how can they be replaced?
    The terminals do not need to be replaced. Just sand or file the corrosion away, exposing clean copper, and the fittings will continue to be functional.
  5. Is a fiberglass enclosure suitable for an installation in a very cold location monitoring corrosion?
    Our fiberglass enclosures can withstand very cold locations, and their fiberglass/plastic construction is very resistant to corrosion.
  6. If the PVC fittings at the bottom of the enclosure have too small an inner diameter to accommodate all the cables passing through, is there a way to remove the PVC fittings?
    Unscrew the PVC fittings to remove them.
  7. How many mounting accessories should be ordered for each major device inside an enclosure?
    It depends on the device. Most devices have built-in mounting flanges, but some items require a separate mounting bracket.
  8. What sizes do backplates come in?

    Backplates are available in sizes designed to fit in Campbell Scientific enclosures: 10 x 12 in., 12 x 14 in., 14 x 16 in., and 16 x 18 in.

  9. Does the enclosure have a mounting bracket inside to mount the datalogger?
    Yes. Each enclosure Campbell Scientific sells has a powder-coated backplate with holes on 1 in. centers that match the mounting flanges on our equipment for easy mounting.
  10. How can more of the putty used to seal the cable-entry conduit of the enclosure be ordered?

    The putty is shipped as part of the 7363 Enclosure Supply Kit. To order an additional 4 ounce container of electrician’s putty, specify pn 6596.

Visite la librería de FAQ

Casos de aplicación

solar decathlon
Solar Decathlon
The Solar Decathlon takes place every other year on the National Mall in Washington, D.C.......leer más
Explorar todos los Casos de Aplicación.