Este producto ya no está disponible y ha sido reemplazado por: CS11-L. Algunos accesorios, recambios o servicios pueden todavía estar disponibles.
| Services Available |
|---|
Resumen
The CS10 monitors ac current along an electrical wire for the range of 0.15 A to 200 A. It outputs a millivolt signal that many of our dataloggers can directly measure.
Leer másVentajas y características
- Ideal applications include motor or generator load conditions, efficiency studies, intermittent fault detection, and rough submetering
- Sin conexión eléctrica directa al sistema eléctrico
Imágenes
Descripción detallada
The CS10 uses CR Magnetic's CR8459 Current Transformer to detect the ac current along an electrical wire using the magnetic field that is generated by that current. The CS10 is external to the wire jacket and has no direct electrical connection to the system.
The CS10 is recommended for measurements that do not require high accuracy, such as motor or generator load condition monitoring, efficiency studies, intermittent fault detection, and rough submetering.
Especificaciones
| Rango de medida | 0.15 to 200 A |
| Frecuencia | 50 and 60 Hz |
| Insulation Resistance | 100 MΩ (@ 500 Vdc) |
| High Potential | 2000 V |
| Rated Current | 200 A |
| Accuracy with 10 Ω Maximum Burden (resistive) | Typically ±5% of actual value (with provided multiplier) |
| Rango temperatura funcionamiento | -25° to +55°C |
| Case Material | Polypropylene resin |
| Construction | Epoxy encapsulated |
| Outer Diameter | 4.8 cm (1.89 in.) |
| Inner Diameter | 1.9 cm (0.75 in.) |
| Height | 1.7 cm (0.67 in.) |
Compatibilidad
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Documentos
Folletos producto
Preguntas frecuentes
Número de FAQs relacionadas con CS10-L: 2
-
No. The CS10-L is an ac-only sensor.
-
Yes. Three CS10-L sensors can be connected to a datalogger to measure the amperage on each of three phases.