PC400 Software nivel intermedio para datalogger
Fácil configuración
Potentes herramientas y editores de programación
meteorología aplicaciones agua aplicaciones energía aplicaciones gas flux & turbulence aplicaciones infraestructuras aplicaciones suelo aplicaciones

Resumen

Versión actual: 4.5

El PC400 es nuestro software soporte para PC de nivel intermedio para dataloggers Campbell Scientific. Este versátil software admite variedad de opciones en telecomunicaciones, descarga de datos manual y visualización de datos del datalogger. Incluye el software Short Cut y los editores de lenguajes de programación (CRBasic, Edlog).

El PC400 no admite enlaces de comunicaciones combinados (por ej. telefonía a RF), ni enrutado PakBus®, ni programación de la descarga de datos; en cuyo caso LoggerNet sería la herramienta software adecuada.

Leer más

Ventajas y características

  • Incluye asistente EZSetup para configurar fácilmente una estación
  • Compatible con nuestros dataloggers CR200(X)-series, CR300-series, CR510, CR800/850, CR10(X), CR1000(X), CR6, 21X, CR23X, CR7, CR3000, CR5000, CR9000, y CR9000X con sistemas operativos tipo mixed-array, table-data, o PakBus®
  • Herramientas de programación ShortCut, Edlog, y CRBasic para crear/editar programas de datalogger que miden sensores y controlan dispositivos SDM, multiplexores y relés
  • Descarga de datos por conexión directa, modems telefónicos, Ethernet, radio (UHF, VHF o spread spectrum), o modems multidrop
  • Visualización de datos en tiempo real o históricos
  • Gráfico de series temporales de ilimitadas variables de la base de datos
  • Herramientas para diagnóstico de fallos (emulador terminal y log comunicaciones)
  • Incluye utilidad Device Configuration Utility para configuración del hardware Campbell Scientific

Imágenes

Descripción técnica

EZSetup Wizard

To facilitate station setup, PC400 provides the EZSetup Wizard. This simple, station-oriented wizard walks the user through the setup process. The wizard can also be used to modify settings for an existing site.

Clock/Program, Monitor Data, Collect Data

These tools allow customers to set/edit the station’s settings, set the datalogger’s clock, view real-time data, set flags/ports, and collect data on demand. Communication links supported include direct connect, phone modems, Ethernet, narrow-band UHF and VHF radios, spread spectrum radios, or multidrop modems.

Programming

PC400 offers two full-featured programming tools—the CRBasic Editor and Edlog. The CRBasic Editor (similar in syntax to the BASIC programming language) supports our newer dataloggers. Edlog supports our retired dataloggers and the CR7.

For those who prefer a simpler means of programming their dataloggers, PC400 includes Short Cut for Windows (SCWin). SCWin can generate a program for any of our dataloggers and supports all of our popular sensors, as well as user-created custom sensor files (using an existing sensor file as the starting point). Short Cut can also be used for the ET107, ET106, and MetData1 Weather Stations.

View Pro

View Pro allows data from a data file to be viewed in a numeric format, or in one of several graphical formats, including a line graph, X/Y plot, histogram, rainflow histogram, or FFT. Multiple data files can be opened at once, allowing side-by-side comparison of the data. The graphs can be saved in a variety of formats. The left and right y-axes of the graphs can be configured independently.

Device Configuration Utility

DevConfig allows you to send new operating systems to dataloggers and other devices with flash memory, configure various PakBus settings in dataloggers, and edit settings for communication peripherals such as the NL240 and RF401A.

Card Convert

CardConvert is used to convert and save binary data from a PC Card, CompactFlash card, or microSD card. PC Cards are compatible with our CR5000 and CR9000X dataloggers. CompactFlash cards are compatible with our CR1000, CR3000, CR5000, and CR9000X dataloggers. MicroSD cards are compatible with our CR6 datalogger.

Split

Split is used to post-process data files and create reports. It sorts and combines data based on time or conditions, performs calculations on data values, converts “Day of Year” calendar dates into more traditional date/time stamps and allows variable column widths for printable reports.

Especificaciones

Current Version 4.5
Operating System Windows 10, 8, or 7
Requirement TCP/IP services must be installed and enabled on the PC.

Compatibilidad

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
CR1000
CR1000X
CR200X (retired)
CR300
CR6
CR800
CR850

Dispositivos Comunicaciones

Product Compatible Note
KonectPBRouter

Miscellaneous

Product Compatible Note
21X (retired) The 21X requires three PROMs; two PROM 21X Microloggers are not compatible.
CR10 (retired)
CR10X (retired)
CR216X (retired)
CR23X (retired)
CR3000
CR310
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR9000 (retired)
CR9000X

Información de compatibilidad adicional

TCP/IP services must be running on the computer.

Computer

Required computer operating system—Windows 7, 8, or 10

Datalogger Considerations

Compatible Retired Dataloggers

PC400 is compatible with the mixed array, PakBus, and TD datalogger operating systems for the CR510, CR10X, and CR23X dataloggers.

Descargas

PC400 Patch v.4.5 (124 MB) 18-08-2017

Upgrade PC400 version 4.0 and newer to 4.5; no intermediate steps are required.

PC400 must be installed on your computer.

Supported Operating Systems: (32 and 64 bit) Windows 10, 8.1, 8 or 7.

Historial revisiones

Device Configuration Utility v.2.19 (33.2 MB) 06-12-2018

A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.

Supported Operating Systems:

Windows 10, 8.1, 8, and 7 (Both 32 and 64 bit)

Historial revisiones

Preguntas frecuentes

Número de FAQs relacionadas con PC400: 23

Expandir todoDesplegar todo

  1. If the error message “The security code was not recognized by the station” is displayed in LoggerNet, or the error message “Unable to send the program. Invalid security code” is displayed in PC400, it may be necessary to update the datalogger’s support software.

    Using a CR1000 running Operating System Version Std.04 or later, the problem may be that LoggerNet or PC400 is interpreting the response from the datalogger incorrectly. Confirm that the new datalogger program is in the CR1000; typically, the table definitions can be updated and the problem is resolved. Newer versions of LoggerNet and PC400 software resolve this problem. Please visit our Downloads page to obtain the latest patch: www.campbellsci.com/downloads

  2. It is not possible to transfer collected data directly from PC400 to a database. PC400 creates ASCII text data files containing the collected data.

    To transfer data logger data to a database, consider using LoggerNet and LNDB (LoggerNet Database Software).

  3. When using PC400 to connect to a data logger on an RS-232 port, the baud rate must be matched. This is done through the PC400 data logger settings.

  4. No. However, real-time data can be displayed in tabular form in the Monitor Data tab.

  5. The available COM ports listed in the COM Port drop-down menu are supplied to PC400 by the Windows Operating  System (OS). If there are no COM ports shown for selection, it most likely means that there are no COM ports registered with the Windows OS. This can be confirmed using the Windows Device Manager (Control Panel | Device Manager | Ports).

    Most modern laptops are not equipped with native RS-232 COM ports. In this situation, a USB-to-RS-232 adapter cable must be used to connect to the datalogger. Even when the drivers for this device have been properly installed, the derived COM port will not be shown for selection until the cable is attached to the laptop.

  6. LoggerNet and PC400 have a program named Split that enables selection of records and mathematical calculations on data values in a data file. The program is especially useful in isolating data records of interest from data files from array-based dataloggers where several different types of records may be stored in the same file.

    Note that the version of Split in PC200W is a different application. Its only function is to separate each array in a mixed-array file into separate files.

  7. A patch, which is a software upgrade within a major revision level (Example: 4.0 to 4.1), is free. The patch can be downloaded from the Downloads page.

    When upgrading between major revision levels (Example: 3.4 to 4.1), a software purchase is required. The upgrade for PC400 is PC400/U (pn 18369).

  8. PC400 is designed to run natively only under the Windows OS. However, there are third-party applications available for the Mac OS that can create a virtual environment in which some Windows applications can run. Note that Campbell Scientific does not provide testing or support for these applications.

  9. No. This mid-level data logger support software is available for purchase and is listed in the Ordering information area of the PC400 product page. 

Casos de aplicación

Moldova: Disaster Risk Mitigation
Due to its geographical position close to the Black Sea, the local climate in Moldova......leer más

Artículos y notas de prensa