RTDAQ Software adquisición datos tiempo real

Resumen

RTDAQ es el software Campbell Scientific dirigido a aplicaciones que requieren adquisición de datos a alta velocidad. Este versátil software admite veriedad de opciones en telecomunicaciones, descarga de datos manual, y extensiva visualización de datos. RTDAQ incluye también asistente de programación ShortCut y los editores de programación avanzados. 

RTDAQ no soporta enlaces de comunicación combinados (por ej. telefonía a RF) o descarga de datos programada desatendida; en estos casos es necesario adquirir LoggerNet.

Leer más

Ventajas y características

  • Variedad de ventanas para monitorizar los datos del datalogger en casi tiempo real, incluyendo Fast Graph, Histogram Viewer, FFT Viewer, Table Monitor, y X-Y Plot
  • Visualizar ficheros de datos históricos en modos especializados (FFTs y histograms)
  • Integración con RTMC y PakBus Graph
  • Provides non-invasive field calibration of sensors—incorporating the appropriate multipliers and offsets into the datalogger program
  • Incluye programa ShortCut para la generación de programas en CR6, CR800, CR1000, CR3000, CR5000, así como capacidad entry-level para el CR9000X
  • Updated versions of the detail-level program generators for the CR9000X and CR5000 are included (previously available in PC9000)
  • Disponible versión de prueba de 30 días

Imágenes

Descripción técnica

EZ Setup Wizard

To facilitate station setup, RTDAQ provides an EZSetup Wizard. This simple, station-oriented wizard walks the user through the setup process. The wizard can also be used to modify settings for an existing station.

Clock/Program, Monitor Data, Collect Data

These tools are used to set a datalogger’s clock, send programs from the computer to the datalogger, display real-time datalogger measurements in several different formats, and collect data on demand.

Short Cut, ProgGen, CRBasic

RTDAQ provides a choice of programming tools. Short Cut (SCWIN) is an easy-to-use program generator that creates straight-forward programs in seven steps. It supports over 100 sensors (including generic measurements) and multiplexers.

ProgGen is an updated version of the detailed program generator contained in PC9000 software (RTDAQ’s predecessor). ProgGen contains many measurement and setting windows for configuring almost any type of sensor. It is compatible only with the CR5000 and CR9000X dataloggers.

The CRBasic Editor provides sophisticated program editing capabilities. Programs generated by Short Cut and ProgGen can be edited in CRBasic.

View Pro

View Pro lets you view data files (*.DAT files) in a tabular format. It can create graphs that display multiple traces of data. View Pro also supports the viewing of specialized data storage such as FFTs and histograms.

Real-Time Monitoring and Control (RTMC)

RTMC is used to create customized displays of real-time data, flags, and ports. It provides digital, tabular, graphical, and Boolean data display objects, as well as alarms. Sophisticated displays can be organized on multi-tabbed windows. Users who want additional capabilities and more flexibility can purchase RTMC Pro—an enhanced version of RTMC.

Device Configuration Utility (DevConfig)

DevConfig allows you to send new operating systems to dataloggers and other devices with flash memory, configure various PakBus settings in dataloggers, and edit settings for communication peripherals such as the NL201 and RF401A.

LogTool, PakBus Graph

In the Tools pull-down menu, you can select LogTool and PakBus Graph. These tools can help you discover the cause of communication problems.

Card Convert

CardConvert is used to convert and save binary data from a PC Card, CompactFlash card, or microSD card. PC Cards are compatible with our CR5000 and CR9000X dataloggers. CompactFlash cards are compatible with our CR1000, CR3000, CR5000, and CR9000X dataloggers. MicroSD cards are compatible with our CR6 and CR1000X dataloggers.

Split

Split is used to post-process data files and create reports. It sorts and combines data based on time or conditions, performs calculations on data values, converts “Day of Year” calendar dates into more traditional date/time stamps and allows variable column widths for printable reports.

License for Use

RTDAQ is protected by United States copyright law and international copyright treaty provisions. Installation of RTDAQ constitutes an agreement to abide by the provisions of its licensing agreement. The agreement grants the user a non-exclusive license to use the software in accordance with the following:

  1. The purchase of this software allows you to install and use a single instance of the software on one physical computer or one virtual machine only.
  2. This software cannot be loaded on a network server for the purposes of distribution or for access to the software by multiple operators. If the software can be used from any computer other than the computer on which it is installed, you must license a copy of the software for each additional computer from which the software may be accessed.
  3. If this copy of the software is an upgrade from a previous version, you must possess a valid license for the earlier version of software. You may continue to use the earlier copy of software only if the upgrade copy and earlier version are installed and used on the same computer. The earlier version of software may not be installed and used on a separate computer or transferred to another party.
  4. This software package is licensed as a single product. Its component parts may not be separated for use on more than one computer.
  5. You may make one (1) backup copy of this software onto media similar to the original distribution, to protect your investment in the software in case of damage or loss. This backup copy can be used only to replace an unusable copy of the original installation media.

RTDAQ software may not be sold, included, or redistributed in any other software or altered in any way without prior written permission from Campbell Scientific.

Especificaciones

Current Version 1.3
Sistema operativo Windows 10, 8, or 7

Compatibilidad

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
CR1000
CR1000X
CR6
CR800
CR850
CR9000XC

Miscellaneous

Product Compatible Note
CR3000
CR5000 (retired)
CR9000X

Información de compatibilidad adicional

Computer Requirements

Required computer operating system is Windows 7, 8, or 10.

Datalogger Considerations

RTDAQ is available as a download from our website.

Documentos

Descargas

RTDAQ Patch v.1.3 (186 MB) 09-11-2017

This patch will upgrade RTDAQ version 1.0, 1.1 or 1.2 to 1.3. RTDAQ 1.x must be installed on the computer.

Note: This application requires the Microsoft .Net 4.0 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Historial revisiones

RTDAQ Trial v.1.3 (195 MB) 09-11-2017

A fully functional 30 day Trial Version of RTDAQ - Real Time datalogger support software for High Speed dataloggers (CR9000X, CR5000, CR3000, CR1000, CR800/CR850 and CR6).

Note: This application requires the Microsoft .Net 4.0 Framework.  If it is not already installed on your computer,  it can be obtained from the Microsoft Download Center.

Preguntas frecuentes

Número de FAQs relacionadas con RTDAQ: 1

  1. A fully-functional 30 day trial version of RTDAQ is available for download free of charge. The trial version may be installed and used until the ordered software arrives. After the ordered software is received, run the installation again. This time, when prompted, supply the software key to unlock the fully-licensed version.