DESCATALOGADO ›
Este producto ya no está disponible y ha sido reemplazado por: NR-LITE2-L. Algunos accesorios, recambios o servicios pueden todavía estar disponibles.
NR-LITE-L Net Radiometer
Services Available

Resumen

The NR-Lite is a rugged net radiometer manufactured by Kipp & Zonen. Net radiometers measure the energy balance between incoming short-wave and long-wave IR radiation relative to surface-reflected short-wave and outgoing long-wave IR radiation. This net radiometer includes two black conical absorbers, one facing upward and the other facing downward. They are coated in PTFE, making them resistant to weather without requiring a fragile plastic dome. Both absorbers are calibrated to an identical sensitivity coefficient.

The only difference between the NR-Lite and the NR-Lite2 is the color of the wires.

Leer más

Ventajas y características

  • Compatible con la mayoría de dataloggers Campbell Scientific

Imágenes

Descripción detallada

The NR-Lite Net Radiometer measures the energy balance between incoming short-wave and long-wave infrared radiation relative to surface reflected short-wave and outgoing long-wave infrared radiation. This rugged device includes two black conical absorbers—one facing upward and the other facing downward. The absorbers are coated in PTFE making them resistant to weather without using a fragile plastic dome. They are calibrated to an identical sensitivity coefficient.

The NR-Lite includes a bubble level to ensure proper installation and a rod that deters birds from roosting on the sensor. It produces a millivolt signal that is measured directly by a Campbell Scientific datalogger; most of our dataloggers are compatible.

The only difference between the NR-Lite and the NR-Lite2 is the color of the wires.

Especificaciones

Sensor Blackened thermopile
Spectral Response 0 to 100 µm
Sensitivity 10 µV W-1m2 (nominal)
Output Range ±25 mV
Rango de medida ±2000 W m-2
Rango temperatura funcionamiento -30° to +70°C (manufacturer)
Diámetro sensor 8.0 cm (3.1 in.)
Support Arm Diameter 1.6 cm (0.6 in.)
Support Arm Length 80 cm (31.5 in.)
Peso sensor 200 g (7.0 oz)
Support Arm Weight 635 g (23 oz)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Dataloggers

Producto Compatible Nota
CR1000 (retired)
CR200X (retired)
CR216X (retired)
CR3000 (retired)
CR5000 (retired)
CR800
CR850
CR9000X (retired)

Miscelaneo

Producto Compatible Nota
21X (retired)
CR10 (retired)
CR10X (retired)
CR23X (retired)
CR500 (retired)
CR510 (retired)
CR9000 (retired)

Documentos

Casos de aplicación

Alaska: Measuring Fluxes in Forests
Scientists and land-use managers have long recognized the importance of forest lands for their role......leer más