Can be used in a variety of applications
Resumen
The 109SS is a rugged, accurate probe that measures soil or water temperature from -40° to +70°C. It is especially suited for harsh, corrosive environments, and can be easily interfaced with our dataloggers.
Leer másVentajas y características
- Diseñado para ambientes duros y corrosivos
- Tiempo de respuesta rápida
- Amplio rango de medida de temperatura
- Fácil de instalar o quitar
- Compatible con la mayoría de nuestros dataloggers actuales y obsoletos
Imágenes
Descripción detallada
The 109SS consists of a thermistor encased in a sheath made from grade 316 stainless steel. The rugged stainless-steel sheath protects the thermistor allowing the 109SS to be buried or submerged in harsh, corrosive environments. This probe also has a fast time response.
The 109SS's thermistor can survive temperatures up to 100°C, but the overmolded joint and cable should not be exposed to temperatures hotter than +70°C.
Especificaciones
| Output | Analog |
| Operating Temperature Range | -40° to +70°C |
| Accuracy |
|
| Maximum Submergence | 45.7 m (150 ft) or 434 kPa (63 psi) |
| Temperature Measurement Range | -40° to +70°C |
| Thermistor Temperature Survival Range | -50° to +100°C |
| Overmolded Joint and Cable Temperature Survival Range | -50° to +70°C |
| Interchangeability Error |
|
| Steinhart-Hart Equation Error | ≤ 0.02°C (-40°) |
| Time Constant in Air |
|
| Sensor Description | Micro-BetaCHIP Probe 10K3MCD1, 0.5 mm (0.018 in.) diameter, 10 kohm at 25°C |
| Cable Description | 0.56 cm (0.22 in.) diameter with Santoprene jacket |
| Cable/Probe Connection | “ATUM” heat shrink, “Macromelt” overmolded joint |
| Stainless-Steel Sheath Diameter | 0.16 cm (0.063 in.) |
| Stainless-Steel Sheath Length | 5.84 cm (2.3 in.) |
| Overmolded Joint Diameter | 1.02 cm (0.40 in.) |
| Overmolded Joint Length | 4.24 cm (1.67 in.) |
| Weight | 0.1 kg with 3.2 m cable (0.2 lb with 10.5 ft cable) |
Compatibilidad
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Dataloggers
| Producto | Compatible | Nota |
|---|---|---|
| CR1000 (retired) | ||
| CR3000 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) |
Información de compatibilidad adicional
Data Logger Considerations
Programming
The instruction set for our CR200(X)-series, CR800-series, CR1000, and CR3000 dataloggers contains the Therm109 instruction for measuring the 109SS probe. Programming is more complicated for other data loggers because they must use generic measurement instructions.
Installation Considerations
Soil Temperature
The 109SS is suitable for shallow burial only. Placement of the sensor’s cable inside a rugged conduit may be advisable for long cable runs—especially in locations subject to digging, mowing, traffic, use of power tools, or lightning strikes.
Water Temperature
The sensor can be submerged to 46 m (150 ft) or 63 psi. Please note that the 109SS is not weighted. Therefore, the installer should either add a weighting system or secure the sensor to a fixed, submerged object, such as a piling.
Documentos
Folletos producto
Manuales
Conformidad
Preguntas frecuentes
Número de FAQs relacionadas con 109SS: 4
Expandir todoDesplegar todo
-
Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:
- An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.
- An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.
If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.
If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.
- –ET models terminate with the connector for an ET107 weather station.
- –ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
- –QD models terminate with the connector for a RAWS-F Quick Deployment Station.
- –PW models terminate with the connector for a PWENC or pre-wired system.
-
Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:
- Model number
- Cable Termination Options list
If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.
All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.
Note: As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.
-
Many Campbell Scientific sensors are available with different cable termination options. These options include the following:
- The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a datalogger.
- In the –C (–C w/ET/CS110 Connector) option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
- In the –CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
- In the –PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
- In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.
Note: The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.
-
To incorporate a sensor that is compatible with wireless sensor interfaces into a wireless network, a CWS900-series wireless sensor interface is needed, as well as an A205 CWS-to-PC interface to configure it.
Casos de aplicación
RESPEC, a water-resources consulting and services firm, is currently under contract to operate and maintain......leer más