FAQs Preguntas frecuentes acerca de nuestros productos y soluciones

What are the different cable termination options available for Campbell Scientific sensors?

Many Campbell Scientific sensors are available with different cable termination options. These options include the following:

• The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a datalogger.
• In the –C (–C w/ET/CS110 Connector) option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
• In the –CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
• In the –PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
• In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.

Note: The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.

FAQs similares

• ¿Que es el SDI-12?
• The measurement instructions will likely remain the same but in addition to the multiplier and offset, the type of pulse may change for the wind speed and the excitation voltage may change for the wind direction. The manual easily explains how the logger needs to be programmed.
• ¿Que es un datalogger?
• How do long cable lengths affect measurements?
• En que consiste la medida de temperatura de un PRT (Pt100 / Pt1000) ?
• What are the main components of the CS526-L?
• What are the advantages of using an ISFET chip pH sensor instead of a glass bulb pH sensor?