CM225 Solar Sensor Mounting Stand

Resumen

The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1 to 2 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the sensor to the CM225 as well as level the sensor.

The CM225 consists of a rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.

Imágenes

CM225 attached to a CM200-series crossarm (sold separately)
CM225 with an LI190R-L quantum sensor (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)
CM225 with an LI200RX-L pyranometer (sold separately)

Especificaciones

Why/When to Use Used when the pyranometer only needs to be mounted in a horizontal position. It is also typically used with a crossarm.
Material 12 gage, 304 stainless steel
Dimensions 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.)
Weight 0.34 kg (0.75 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Sensores

Producto Compatible Nota
CMP11 Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit.
CS300 (retired) Requires the 18356 Leveling Base.

Equipos para montajes

Producto Compatible Nota
CM106 (retired)
CM106BE Tripod
CM110
CM115
CM120
CM202
CM204
CM206
UT10
UT20
UT30

Miscelaneo

Producto Compatible Nota
CMP21 Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit.
CMP6 (retired) Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit.

Información de compatibilidad adicional

Mast or Vertical Pole

The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.

User-Supplied Vertical Pole

The CM225 can mount to a 0.75 to 1.5 in. pipe size (1 to 2 in. OD).

Documentos