CM206 6 ft Crossarm with One CM210 Mounting Kit

Resumen

The CM206 is a crossarm that attaches to an instrumentation tower or tripod. It provides a rugged, weather-resistant sensor mount for up to two sensors. The CM206 is compatible with our tripods and towers. It can be attached to a tripod mast or a user-supplied pole.

Note: In the image, the dark gray components are those included with the CM206. The lighter components are sold separately and demonstrate how the CM206 is used.

Leer más

Imágenes

The dark gray components are those included with the CM206. The lighter components are sold separately and demonstrate how the CM206 is used.
The dark gray components are those included with the CM206. The lighter components are sold separately and demonstrate how the CM206 is used.

Descripción detallada

The CM206 provides a rugged, weather-resistant sensor mount for one or two sensors. It consists of a 6-ft aluminum pipe and the CM210 mounting bracket kit. U-bolts included with the mounting bracket are used to attach the crossarm to a tripod mast, tower leg, or user-supplied vertical pipe (1.0” to 2.1” OD). All of our tripods and towers are compatible with the CM206. If the CM206 will be mounted on a tower, an additional CM210 bracket can be added so that the crossarm is secured to two of the three vertical risers within the tower.

A U-bolt mounting scheme allows the crossarm to be secured to the tripod or tower at the optimal measurement height for the sensor. The sensor is then mounted to the other end of the crossarm using a variety of mounts—depending on the sensor being deployed. The options available for mounting the sensor to the crossarm are listed as Common Accessories under the Ordering Info tab.

Especificaciones

Mounting Material 304 stainless-steel bracket with stainless-steel U-bolts and hardware
Crossarm Material 1 in. IPS anodized aluminum pipe
Pipe Outer Diameter 3.34 cm (1.315 in.)
Pipe Length 1.8 m (6 ft)
Weight 2.27 kg (5.0 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Equipos para montajes

Producto Compatible Nota
1017
1049
17953
41303-5A
43502-L
CM106 (retired)
CM106BE Tripod
CM110
CM115
CM120
CM225
CM230
CM235
NR Sensor Mount
RAD10
UT30

Miscelaneo

Producto Compatible Nota
27065
CM255
CM255LS
RAD06
RAD14

Información de compatibilidad adicional

Campbell Scientific Tripod and Towers

This crossarm can also be attached to a user-supplied pole (1.0 in. to 2.1 in. OD).