BP12 12 Ah 12 V Sealed Rechargeable Battery with Mounts

Resumen

The BP12 is a rechargeable, 12 V, 12 Ah battery pack that can power a Campbell Scientific system that has components that have above-average power requirements, such as satellite transmitters.

Leer más

Imágenes

Descripción detallada

The BP12 requires a regulated charging source (provided by the CH150 or CH200 regulator connected to an unregulated solar panel or a wall charger). The BP12 includes a 24 in. attached cable that terminates in a connector for attaching the battery to a CH150 or CH200 regulator. The BP12 also comes with a 24 in. cable for use with the CR6 datalogger or other products that need a pigtail termination instead of a white connector. (This cable is bagged and taped to the battery.) Switching the standard cable for the pigtail cable is easily accomplished by the user. The BP12 is shipped with hardware for mounting the battery in our enclosures. An ENC16/18 or larger enclosure is recommended.

Especificaciones

Battery Type Sealed lead acid (SLA)
UL Approval File Number MH16464
Output Voltage 12 Vdc
Nominal Rating 12 Ah
Battery Cables Length 0.6 m (2 ft)
Dimensions
  • 15.0 x 9.4 x 8.9 cm (5.9 x 3.7 x 3.5 in.) for battery only
  • 19.1 x 10.3 x 9.7 cm (7.5 x 4.0 x 3.8 in.) for battery with mounting bracket
Weight 4.4 kg (9.8 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Equipos para montajes

Producto Compatible Nota
ENC10/12
ENC12/14
ENC14/16
ENC16/18

Miscelaneo

Producto Compatible Nota
34029

Videos & Tutoriales

Preguntas frecuentes

Número de FAQs relacionadas con BP12: 6

Expandir todoDesplegar todo

  1. How can the age and condition of a sealed rechargeable battery be determined?

    Look for a stamp on top of the battery. The stamp should be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

    To evaluate the condition of the battery:

    1. Charge the battery.
    2. Let the battery sit for a couple of hours.
    3. Measure the open circuit voltage to get an estimated indication of condition.
  2. Are replacement lead wires sold for the BP12?

    Yes. These leads are pn 22024, Battery Cable.

  3. Should the BP12 be fully charged before deployment?

    Yes. It is a good idea to fully charge the BP12 with the CH100/CH200 before deployment.

  4. Is the battery mounting bracket for the BP12 battery sold separately?

    Yes. The BP12 Mounting Bracket is available as pn 8061. To mount the bracket to the enclosure’s backplate, it may be necessary to purchase four pn 505 screws and four pn 6044 grommets.

  5. Can the BP12 be charged with commercially available chargers (trickle charge, float charge, etc.)?

    Trickle chargers and float chargers vary. It is possible to do this, but ensure that the regulator voltage will match the battery specifications [13.65 V – (18 mV) x (T-25°C)] for float charging.

  6. Why is the battery in the BP12 and BP24 assembly taller than the bracket?

    The discrepancy is not a mistake—the bracket is intentionally designed to be shorter than the battery. When mounted inside an enclosure, the back of the battery rests against the mounting grommets. The lid to the mounting bracket compresses the battery slightly, holding the battery firmly in place.

Visite la librería de FAQ

Casos de aplicación

delaware: urgent action on bridge
Delaware: Urgent Action on Bridge
The Delaware Department of Transportation (DelDOT) notified Intelligent Infrastructure Systems (IIS) and Pennoni of the......leer más
Explorar todos los Casos de Aplicación.