The 18356 leveling base, manufactured by Apogee Instruments, is required to attach the CS300 or SP230 pyranometer to our CM225 solar sensor mounting stand. The 18356 levels the sensor in the horizontal plane, helping to ensure accurate solar radiation measurements. The 18356 uses a bubble level and three adjustable leveling screws to level the sensor.Leer más
The 18356 has several functions:
|Why/When to Use||Levels solar radiation sensors manufactured by Apogee Instruments.|
|Diameter||7.6 cm (3.0 in.)|
|Weight||91 g (0.2 lb)|
Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.
Número de FAQs relacionadas con 18356: 1
The leveling base provides physical stability and helps ensure the sensor is leveled correctly. It is not recommended to use the sensor without the base. The sensor mounts to the base with an included bolt. However, a user-supplied plate with a hole drilled in it could be used instead to accept the sensor’s mounting bolt.
Note: Whatever mounting method is used, the sensor has to be levelled to operate correctly.