FAQs Preguntas frecuentes acerca de nuestros productos y soluciones

Realizar consulta Realizar consulta

All FAQs (1868 total: showing 1021-1040)

To save the same data elements to both the CR1000/CR3000 memory and a CFM100/NL115, are two data tables needed—one with the CardOut() instruction and one without? Or does the data table automatically get sent to both if there is a CardOut() instruction?
Does anything special need to be done in LoggerNet to retrieve data from the memory card in the CFM100?
Is it OK to insert a CompactFlash card that has old data on it into a CFM100 or NL115? Do CF cards always have to be reformatted or completely erased before inserting them into a device?
Why would a CompactFlash card that works fine in cameras and computer drives not work in a CFM100 or NL115?
Can any type of CompactFlash card be used with a CFM100 or NL115?
What size of CompactFlash cards can be used with a CFM100 or NL115?
When is a file on the card of a CFM100 or NL115 open?
What is the best way to collect data from a CompactFlash card in a CFM100?
What does a constant solid orange/red status LED on a CFM100 indicate?
What should be done if the rods of the 034B-L wind sensor are bent?
What is the power consumption of the 034B-L anemometer?
Do the vane and anemometer of the 034B-L produce analog or digital signals?
What type of pole and mounting bracket should be used to mount a 034B-L against an outside wall of a building, sticking up over the roofline?
Can the 034B-L store data?
What needs to be done to replace an existing 034A-L at a weather station with a new 034B-L?
What is the major difference between the 034B-L and the 03002-L?
If the connection can no longer be made to a data logger that is connected to a Raven XT-series modem via an RS-232 port, what might be the reason?
If the RS-232 connection between a datalogger and a Raven XT-series modem works fine, but the CS I/O connection does not work, what might be the cause?
Using the RavenXTG or RavenXTV as an Internet device, is it possible to have the data logger email the data file to multiple email addresses daily?
How can the RavenXTG or RavenXTV be coded to only work for a couple hours when the data is to be sent to the server?

Anterior Siguiente