Redox (ORP) / CSIM11-ORP-L
CSIM11-ORP-L ORP Probe
Better Signal Performance
Internal amplifier boosts signal for less interference
meteorología aplicaciones agua aplicaciones energía aplicaciones flujo gas y turbulencia aplicaciones infraestructuras aplicaciones suelo aplicaciones

Resumen

The CSIM11-ORP, manufactured by Wedgewood Analytical, measures oxidation reduction potential (ORP) of liquids. It can be submerged in water or inserted into tanks, pipelines, and open channels. The CSIM11-ORP is intended for non-pressurized  systems and was not designed for applications above 30 psi. Please contact Campbell Scientific for recommendations on probes suitable for installations in pressurized pipes.

Leer más

Ventajas y características

  • Internal amplifier boosts the signal, decreasing signal interference
  • Titanium ground rod runs inside the outer body to eliminate ground loop errors
  • Compatible with most Campbell Scientific data loggers
  • Porous polytetrafluoroethylene (PTFE) liquid junction is less susceptible to clogging as compared to conventional reference junctions
  • Plunger-style pH glass electrode allowing the probe to be mounted at any angle

Imágenes

Descripción detallada

The CSIM11-ORP is similar to the CSIM11, but includes a 0.2-in. platinum band wrapped around the glass electrode, which allows the CSIM11-ORP to respond to the electron density in the fluid. It has a plunger-style pH glass electrode that allows the CSIM11-ORP to be mounted at any angle. The probe's porous polytetrafluoroethylene (PTFE) liquid junction is less susceptible to clogging as compared to conventional reference junctions.

A titanium ground rod runs inside the PPS outer body to eliminate ground loop errors. An internal amplifier boosts the signal, decreasing signal interference. The amplifier is powered by two internal lithium batteries, and thus does not require any current from the datalogger. These batteries are designed to last the lifetime of the probe.

The reference solutions and bulb configuration are optimized for natural water applications. Alternate reference solutions and bulb configurations are available. Contact Campbell Scientific for pricing and availability.

Note: The CSIM11-ORP uses glass bulb technology which has a life expectancy of around 6 months to 2 years, depending on the conditions of the water.

Productos similares

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Dataloggers

Producto Compatible Nota
CR1000 (retired)
CR1000X (retired)
CR300 (retired)
CR3000 (retired)
CR310
CR350
CR6
CR800 (retired)
CR850 (retired)

Información de compatibilidad adicional

Data Logger Considerations

The CSIM11-ORP requires one differential analog input channel.

Especificaciones

Output Analog
ORP Range -700 to +1100 mV
Operating Temperature Range 0° to 80°C
Pressure Range 0 to 30 psig
Accuracy ±0.1% (over full range)
Impedance < 1 Mohm (@ 25°C)
Reference Cell Single Junction KCl/AgCl
Body Material ABS
Wetted Materials ABS, polytetrafluoroethylene (PTFE), Viton, glass, titanium
Cable Jacket Material Polyurethane
Response Time 95% of reading (in 10 s)
Drift < 2 mV per week
Internal Lithium Battery Lifetime 5 years (life of probe)
Diameter 3.0 cm (1.2 in.)
Length 17.8 cm (7.0 in.)
Weight 0.5 kg (1 lb) with 4.57-m (15-ft) cable

Documentos

Folletos producto

Casos de aplicación

New Zealand: Water Quality Monitoring
High-grade coal has been mined on the West Coast of New Zealand since the 1870s.......leer más