Displaying 1 - 7 of 7 articles tagged with: Vibrating Wire
Autor: Eric Schmidt | Última actualización: 03/05/2024 | Comentarios: 0
Did you read our Southwest: Solving the Mystery of Erroneous Dam Monitoring Data case study? Want to get some more details? In this article, we’re going to take a closer look at that case study. If you haven’t read the case study yet, please do...
leer más
Autor: Michael Adams | Última actualización: 01/08/2024 | Comentarios: 0
If you’re not using a CR6 Automated Monitoring Platform for your geotechnical application, you may be missing out on some key benefits that could help ensure the success of your instrumentation and monitoring network. Based on my 30 years of experience with data-acquisition systems, I’ll...
leer más
Autor: Nathanael Wright | Última actualización: 10/17/2023 | Comentarios: 0
Typically, when you use long cable lengths for your vibrating wire measurements, you experience a weaker signal with a greater chance of interference. So, how do you overcome this challenge and improve your measurement quality? Keep reading to find out.
At Campbell Scientific, our vibrating wire...
leer más
Autor: Jacqalyn Maughan | Última actualización: 04/06/2023 | Comentarios: 0
Have you ever thought your bad vibrating wire sensor measurements were caused by erratic or erroneous data? You may be surprised to learn that data issues may not be the cause. If you are using a data-acquisition system other than one of the Campbell Scientific...
leer más
Autor: Nathanael Wright | Última actualización: 03/28/2023 | Comentarios: 0
Campbell Scientific vibrating wire measurement hardware, with our patented VSPECT® technology, offers a distinct advantage over all other vibrating wire measurement systems. Unlike non-Campbell Scientific vibrating wire interfaces that use pulse counting to derive vibrating wire frequency, Campbell Scientific's VSPECT vibrating wire measurement products use spectral...
leer más
Autor: Timothy Jeppsen | Última actualización: 10/07/2020 | Comentarios: 0
In 1997, I had my first introduction to using vibrating wire piezometers to measure groundwater fluctuations. A large engineering firm was monitoring water level to ensure that construction of a large pipeline through the San Bernardino Mountains was not intruding on the groundwater. I was...
leer más
Autor: Robin Deissinger | Última actualización: 02/14/2018 | Comentarios: 0
In this short interview, Josh Brown, Market Product Manager of the Infrastructure Group, shares some of the benefits of using a vibrating wire data logger, such as the CRVW3 3-Channel Vibrating Wire Datalogger. Josh was interviewed by Robin Deissinger, the blog editor. Interview Q&A
What is...
leer más