Displaying 1 - 17 of 17 articles tagged with: CR6
Autor: Nathanael Wright | Última actualización: 01/16/2019 | Comentarios: 0
Did you know you can monitor your data usage using CRBasic program code on our new data loggers with integrated cellular modems and our external Campbell Scientific brand of cellular modules? In this two-part series, I’ll first show you how to do this in the... leer más
Autor: Jacob Davis | Última actualización: 02/28/2018 | Comentarios: 1
Now and then, someone will ask if a Campbell Scientific data logger can be used in place of a PLC (programmable logic controller) or an RTU (remote terminal unit). Admittedly, it is not a simple question to answer. The capabilities of modern PLCs, RTUs, and... leer más
Autor: Matt Perry | Última actualización: 01/17/2018 | Comentarios: 0
During 2017, I was asked several times for a data logger program to retrieve data from Kipp & Zonen’s new RaZON+, a compact-sized dual-axis sun tracker with integrated GPS, smart pyrheliometer, and shaded smart pyranometer. The RaZON+ touts a higher accuracy approach to obtaining solar... leer más
Autor: Michelle Welch | Última actualización: 01/04/2018 | Comentarios: 2
Did you know that you are just a click or tap away from new and improved online data logger assistance? If you have a CR1000X, CR6, or CR300-series datalogger, you’ll want to visit our new resource that is available to you 24/7.
Our new online user... leer más
Autor: Dana Worley | Última actualización: 08/30/2017 | Comentarios: 3
If you have read recent revision history for the Device Configuration Utility (also known as DevConfig), you may have run across the following note: “New USB drivers (RNDIS) were added for [supported] datalogger.” What's that all about? you may have wondered.
Sounds boring, eh?
We think it... leer más
Autor: Timothy Jeppsen | Última actualización: 08/17/2017 | Comentarios: 0
We recently released the CR1000X Measurement and Control Datalogger, and you may be wondering how it compares with our widely used CR1000 datalogger and our innovative CR6 datalogger. If you’re in the market for a new data logger, how do you know which one is... leer más
Autor: Timothy Jeppsen | Última actualización: 08/02/2017 | Comentarios: 3
It should come as no surprise that the CR1000 datalogger (introduced in 2004) has been an incredibly successful data logger. With nearly 100,000 deployed, this data logger has been installed on every continent on the earth. Using the design success of the CR1000, Campbell Scientific... leer más
Autor: Robin Deissinger | Última actualización: 01/11/2017 | Comentarios: 0
In this short interview, Sam Utley, the product manager for the new CR310, tells us about the enhanced functionality this datalogger provides and why he feels the CR310 offers exciting possibilities for our customers. Sam is a member of the Product Management (PM) team at... leer más
Autor: Dana Worley | Última actualización: 12/07/2016 | Comentarios: 2
The Internet of Things offers a lot of advantages in today’s culture. There are consumer devices that let you monitor and control mood lighting and music in your home, keep track of last week’s leftover dinner in your refrigerator, and help you brew a cup... leer más
Autor: Sam Utley | Última actualización: 03/23/2016 | Comentarios: 10
Over the years, you may have seen a number of Weather Underground PWS (personal weather station) discussions and solutions posted on the Campbell Scientific User Forum. In this article, I’ll show you how to post your data directly from an Internet-connected CR6 Measurement and Control Datalogger... leer más
Autor: Gary Roberts | Última actualización: 03/02/2016 | Comentarios: 1
Would it be helpful to include data from a reputable source with your own data? If you have permission to use another source’s data for free or by agreement, how can you easily extract the specific data you want to use without doing a lot... leer más
Autor: Andrew Sandford | Última actualización: 12/23/2015 | Comentarios: 0
Do you have a network of devices, connected using MD485 interfaces, so spread out that extremely long cables are required? Are you worried that the distances, and resultant cable lengths, may be causing communication problems? In this brief article, we’ll look at four tips that... leer más
Autor: Robin Deissinger | Última actualización: 10/28/2015 | Comentarios: 4
We asked our integrators, those folks who sell and install our products, to send us their best photos of Campbell Scientific equipment operating in the field. From all of their submissions, we selected a photo from Western Weather Group as the first-place winner. Runners-up photo... leer más
Autor: Janet Albers | Última actualización: 07/21/2015 | Comentarios: 0
Copying or transposing has become easier with OS 28 (CR6 OS 1). This new operating system enables you to copy portions of an array to a new location, such as when transposing rows and columns.
In this example we start with A(3,2) (3 rows, 2 columns) initialized as... leer más
Autor: Janet Albers | Última actualización: 07/01/2015 | Comentarios: 0
You can perform more complex scaling in an array without needing a For/Next loop. To take advantage of this feature, use OS 28 (CR6 OS 01) or later.
In this example program, a unique set of multipliers and offsets is applied to the column of an... leer más
Autor: Janet Albers | Última actualización: 06/10/2015 | Comentarios: 0
Initializing variables within an array is more flexible than ever with OS 28 (CR6 OS 1). You can think of a single dimensioned array as numbers in a column. Two dimensions, in comparison, puts numbers in rows and columns. The third dimension is a page.
For example:... leer más
Autor: Janet Albers | Última actualización: 05/29/2015 | Comentarios: 0
The newest operating system released by Campbell Scientific for its data loggers is OS 28 for the CR800, CR1000, and CR3000. (The comparable operating system version for the CR6 datalogger is OS 01.) This powerful data logger OS has been enhanced so that you can... leer más