Resumen
The 42875 AL205-Series Receive Radio Cable, manufactured by Maxon Australia, is used to receive ALERT2 packets by connecting an SD-125 Maxon radio to either your AL205B or AL205R. This cable is also used to connect a Maxon SD-125 radio to either the AL205B or AL205R in a receive-only configuration.
This cable is a six-inch cable with a standard female DB9 connector on one end and a four-pin receiver connector on the other. The DB9 connector is used with the radio, and the receiver connector is used with the receive header of the AL205B or AL205R. The receive header on the AL205B or AL205R is a four-pin header located on the side of the unit. This header is labeled according to individual pins, 12V G AI CS.
Leer másImágenes
Descripción detallada
Pinout Description:
- Pin 1: 12V out, Red 5
- Pin 2: Ground, Black 4
- Pin 3: RF Data In, Yellow 2
- Pin 4: Channel Select No Connect, 1, 3, 6, 7, 8, and 9
Especificaciones
| Connectors | Female DB9 4-pin header |
| Cable Type | Discrete |
| Length | 15.24 cm (6.0 in.) |
Figura en
Replacement Part for the following products: