SP30 30 W Solar Panel

Resumen

El SP30 es un panel solar de 30W. Se utiliza habitualmente en sistemas que tienen requerimientos de alimentación superiores a la media, o en estaciones de alta montaña. Se conecta a nuestras fuentes de alimentación o reguladores para cargar la batería, y permite de esta forma el funcionamiento desatendido de nuestros sistemas en lugares remotos sin la necesidad de disponer de 220Vac.

Leer más

Ventajas y características

  • Suministra energía eléctrica en lugares donde 220Vac no es fiable, es caro, o no está disponible

Imágenes

SP20 with attached 31108 extended mounting kit (sold separately)

Descripción detallada

The SP30 uses the regulator in the PS150, PS200, CR3000, CR6 to recharge their batteries. The SP30 has a 5 m cable with stripped leads that connect to the power supply or datalogger battery base.

The SP30R is supplied with a regulator. It can recharge a user-supplied deep-cycle battery. This solar panel has a 5 m cable with stripped leads that connect to the battery. Please note that, the SP30R draws a continuous 5 mA current drain.

Mounting

The SP30 and larger standard panels are supplied with a Solar Panel Multi-Fit bracket (Part number 006607). This is a substantial bracket that fits many different sizes of panels by simply clamping under the rear lip of the frame at either side of the panel (it works with panels up to 500 mm internal width). This allows easy exchange of the panel in the field, e.g. to upgrade to a larger size panel.

Especificaciones

-NOTE- Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Cable Description 20 AWG, 1-twisted pair
Maximum Peak Power 20 W
Maximum Allowable Wind Gust Speed
  • Note: The wind ratings are for solar panels with the indicated mounts and do not account for strength of tower or tripod.
  • 44 m s-1 (99 mph) Standard mount
  • 58 m s-1 (130 mph) Extended mount
Guaranteed Minimum Peak Power 18 W
Current at Peak 1.19 A
Voltage at Peak 16.8 V
On-board Regulator Included No
Cable Length 4.572 m (15 ft)
Dimensions 50.0 x 42.2 x 5.1 cm (19.7 x 16.6 x 2 in.)
Weight 4.4 kg (9.6 lb)

Compatibilidad

Nota: lo siguiente muestra información de compatibilidad notable. No es una lista de todos los productos compatibles.

Dataloggers

Producto Compatible Nota
CR300 (The SP20 is compatible with the built-in regulator.)
CR3000 (The SP20 is compatible with the built-in regulator.)
CR310 (The SP20 is compatible with the built-in regulator.)
CR6 (The SP20 is compatible with the built-in regulator.)
CRVW3 (The SP20 is compatible with the built-in regulator.)

Fuentes Alimentación

Producto Compatible Nota
BP24
CH150
CH200
CH201
PS150 (The SP20 is compatible with the built-in regulator.)

Miscelaneo

Producto Compatible Nota
PS200 (The SP20 is compatible with the built-in regulator.)

Información de compatibilidad adicional

Regulators

The SP20 is compatible with the CH150; the CH200; the CH201; or the regulator built into the PS150, PS200, CR6, CR3000, CR300, CR310, or CRVW3.

Batteries

The SP20 is compatible with the EnerSys Genesis NP series (such as PS150, PS200, BP12, BP24), EnerSys Cyclone series, or Concorde Sun Xtender series (such as BP84) batteries.

Documentos

Videos & Tutoriales